Playstation rgb table sign light

The second playstation symbol table sign . 

Since my petg was to shiny i printed in pla , but i would recommend petg if you plan on using the led's on full white brightness or outdoors.

If you could place the led's better than me or use a flexible led strip ,add hot glue in places where the led strip lifts up or bends. 

Then put it all together layer by layer with ca glue or something similar , don't put too much so there isn't any squeeze out .

Add blue thread lock or a dab of ca glue for the m3 screws in the base so they don't come loose after time .

I used :

ws2812b led lights

Sp611e usb led controller hidden in the base / Or use esp32 with wled for more and better led effects .

usb extension

m3 x 15mm screws 3pcs

3.5mm x 10mm threaded screws for the base back cover

Hope you enjoy the sign :)