November 21, 2025
Description
These charming mini snowman ornaments bring the magic of Christmas to life, whether hung on the tree or displayed individually on a stand, filling your home with a warm festive glow.
These ornaments were designed for perfect printability - Prints without AMS and supports! The parts simply click and screw into each other, no glue or screws are needed.
They fit standard electric tea lights with a diameter of up to 40mm, and heights between 17-27mm. Switch, battery or charging port can be reached from the bottom without disassembly.
You can choose between two different hats and two different scarfs - The model is modular, so you can freely exchange them later.
Disclaimer: This design can only be used with electric tea lights.
Printing
The body parts should be printed with 0.16mm layer height. For best stability, I set the infill of the scarf and head to 100%. For some parts, I enabled a brim to help with bed adhesion.
Assembly
Click the adapter piece into the base as shown in the picture. Put an electric tea light inside and secure it with the threaded holder. Now you can simply screw all parts together.
Like this design? Check out my full Christmas collection! https://makerworld.com/en/collections/2899118-christmas-decoration
Commercial license available on Patreon and MakerWorld!
License:
Standard Digital File License
7,746
Maxx Design
