February 24, 2024
Description
Vori is a baby dragon with Voronoi-patterned scales on his wings and belly. If you want to give him an extra organic feel, print the optional Voronoi web and glue it to his belly!
Vori was specially designed for the Voronoi weekly contest!
Vori needs support for printing, some organic supports were satisfactory during the test prints.
At 100% scale, the model is 167x146x154 mm. The model was tested at 100 % and 50 % scales with an Anycubic Kobra 2 and a Prusa i3 MK3, with PLA filament, both worked fine! Going lower than 50 % may result in extremely thin wing sections that could cause some problems.
The Voronoi belly web also needs support, you may want to carefully check the support contact distance for easy removal, 0.2 mm worked fine for me!
Please show me your makes in the comments!
License:
BY-NC-SA
Gygabor007
