November 21, 2025
Description
Project: leopard.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 112.09x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm
Filaments Used:
#080a0d PLA+ Esun Black Transmission Distance: 0.3
#282b43 PLA+ Esun Dark Grey Transmission Distance: 1.5
#aa7950 PLA+ Esun Light Brown Transmission Distance: 4
#ffffff PLA+ Esun White Transmission Distance: 10
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Dark Grey
At layer #11 (0.96mm) swap to Light Brown
At layer #17 (1.44mm) swap to White for the rest.
License:
Standard Digital File License
xBased
