FRC AprilTags (Easy Swap)

AprilTags (36h11 family ID 1-32) deigned to be mounted easily and make swapping tags quick. The “Holder” will need to be printed for each tag location. There are (4) ¼" countersunk holes for mounting the “Holder” as well as (2) ¼" countersunk holes on the tags if permanently mounting the tag is desired. These hole locations match the official AprilTag Plate hole locations. The tags are sliced to minimize material usage. 

Note: On build plates of 256x256, the “Holder” will print over the purge line. If this is not desired, remove the purge line before the print starts.