Cute laying down goose / no AMS / magnet

Boost MeBoost me if you like this cute little goose and want to support my work. :)
Thank you 🧡

I love geese and needed one for my fridge, so I made a goose magnet. 💖

 

You print this design in multiple parts, no AMS needed. 

Alternatively you can also make it a magnet with the alternative body that comes with a magnet insert.

📂 The files include:

• Folder with STLs grouped by color
• Folder with each individual part 

→ each with and without the magnet slot

 

🎨 Colors: 

• 🧡 Orange (beak&feet)
• 🤍 White (body&ring)
• 🖤  Black (eyes)

🛠 Print info:

• No supports needed
• Default size of 82mm is recommended as minimum
• No AMS needed (printed in multiple parts)

🔧 Assembly info:

You will need super glue and (for the magnet option) a magnetic sticker from the Bambu store.

Clean up the pieces if needed and test fit the parts before gluing.

The eyes are rather tiny so I recommend using tweezers and a toothpick with a small amount of super glue.

Gently hold the pieces in place for a few seconds while the glue sets for the best results. 😊 

 

For the magnet version:

Add the 20mm Bambu magnet sticker to the fitted hole on the bottom of the body.

If you like this one make sure to check out my mallard duck as well :) 
→  https://makerworld.com/en/models/2004051-cute-laying-down-mallard-duck-magnet-no-ams#profileId-2158079

 

If you print this please share your results with me, I always love seeing your prints! 💕