The “Dense” version has regular, less-intense spikes.
The “Split” design has two halves that open in the middle.
The “Full” design has a small cap at one end.
The full height is about 89mm tall (~3.5 inches), and 35.4mm wide (~1.39 inches).
The inside area is 85mm (~3.35 inches) by 19mm (~0.75 inches). This is big enough to hold something like a tube of ChapStick or rolled-up US dollars.
Notes:
Due to the intricacies of the spiked surface and the threads used, a slightly slower print speed is set in the print profile.
It is recommended to not change any of the settings in the 3MF print profile and to make sure that you have properly calibrated your printer for your particular filament.
Please do not try to stick anything inside that might get stuck.
To avoid damaging the threads, please avoid over-tightening the container.
Spiky Sensory Container Roller Grip Changelog:
2026-02-09, 1.6.1
fixed overhang error in threads
slightly faster print time
improved model geometry
2026-02-09, 1.6
new dense spike style with less intense spikiness
tweaked line height to slightly improve print speed
modifiers used in print profile to improve threads
BitingChaos
