Akaza vs Rengoku Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.48mm and the Actual Thickness is 2.4mm

    #000000 PLA BambuLab Matte Charcoal  Transmission Distance: 0.6
    #00358e PLA BambuLab Basic Blue  Transmission Distance: 4
    #00b1b7 PLA BambuLab Basic Turquoise  Transmission Distance: 1.4
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
    #cd007b PLA BambuLab Basic Magenta  Transmission Distance: 3
    #c00d1e PLA BambuLab Basic Red  Transmission Distance: 4
    #fce300 PLA BambuLab Basic Yellow  Transmission Distance: 6
This print uses 7 unique filaments

Swap Instructions:
    Start with Charcoal
    At layer #7 (0.64mm) swap to Blue
    At layer #11 (0.96mm) swap to Turquoise
    At layer #12 (1.04mm) swap to Jade White
    At layer #16 (1.36mm) swap to Magenta
    At layer #18 (1.52mm) swap to Charcoal
    At layer #19 (1.6mm) swap to Red
    At layer #24 (2mm) swap to Yellow
    At layer #29 (2.4mm) swap to Jade White for the rest.