Boost MeHelp me to create more cool designs! :)
🏁 Steering Angle Kit V1 – RWD Conversion for Tamiya TT-02
Description:
Upgrade your Tamiya TT-02 for true RWD drift performance with this steering angle kit.
Designed to provide significantly more steering angle than the stock TT-02D setup, this kit is perfect for drift enthusiasts looking for sharper control and improved steering geometry.
Requirements & Notes:
- This kit is intended for RWD conversion only
- You must remove the front driveshafts, front differential, and the prop shaft
- Upper and lower control arm need to be replaced, original mounting material can be used (adds a lot of camber)
- You will need 4 ball studs with threaded ends (same type used for TT-02D shock mounting)
- All necessary screws can be taken from the stock TT-02 steering assembly
- You have to cut away the steering lock pins on the wheel hubs
- If the bolts should not spin freely in the parts, use a 4.0 mm drill to make sure the holes are the correct size
Features:
- 🔧 Increased steering angle for improved RWD drift capability
- 🧩 Fully compatible with the TT-02 chassis
- 🛠️ Simple installation using standard Tamiya hardware
- 🖨️ Easy to print and strong enough for drift setups
Perfect for anyone converting their TT-02 into a capable RWD drift platform.
Stay tuned for V2!
Have fun drifting!
https://makerworld.com/de/models/1931804-rc-camber-drift-kit-v1-0-for-tamiya-tt02-tt02-d#profileId-2073820
Guggi_Ptk
