Alien Facehugger Cyberbrick Controlled!

There are some awesome Alien Facehugger models out there, however, they are all static models. What if you could print a model that could move?! Disturbing to say the least. See it in action here:

The Cyberbrick ecosystem has made this possible. I have  modified the original model to accommodate the necessary components by enlarging the mesh and then designing an internal enclosure. This is a work in progress so there will certainly be errors and challenges in this design. I already have an idea to add additional functionality. If you print this, be certain to give constructive feedback. 

This model does not include a tail. You can find one outstanding example here:

https://makerworld.com/en/models/1529323-facehugger-tail-realistic-version#profileId-1603638

I would consider printing the tail at ¾ scale to reduce the  weight.

The gearboxes I used are published here:

https://makerworld.com/en/models/1461532-bulldozer-cyberbrick-rc#profileId-1966951

You would need objects 35,36,37,and 38. I would use plenty of grease on the gears and cement the cover on the gearbox.

The clevis attaches to the servo arm with these from Amazon:

https://a.co/d/hqSV1fw

You could print or use something else but these are nice.

(I am sorry this is late for Halloween but it was complicated. This may look like a 3D print but its actually  a real embryo grown from an egg… See you on a darkened spacecraft.)