Boost MeLove what you see? A quick boost keeps designs like this rolling out fast! If you don't have a boost to give, you can still rate the model and share a pic of what colors you chose!
The best thing about Christmas? The look on the kids' faces when they get that gift they were hoping for! Don't ruin the moment by not having enough batteries on hand!
This box is large enough to store up to:
- 45 AA
- 48 AAA
- 10 9v batteries
There is even a small area for some storing other things like odd sized batteries, etc.
This model doesn't require an AMS unless you're printing the lid that has the battery icon on it. If you're printing the blank lid instead, this can all be done without an AMS!
The insert will lock in pretty tight without the need for glue.
The hinges and latches use a total of six (6) M3x30 screws.
There are a total of 6 plates.
- Plates 1 & 2 are both lid options, you only need to print the one you want
- Plate 1 is the lid with the battery icon (AMS required)
- Plate 2 is the lid without the battery icon (no AMS requried)
- Plate 3 has the latches by themselves. This is only to allow you to choose a color when printing from a phone. If you want to print them the same color as the box or the insert, you can move them to one of those plates on a PC
- Plate 4 is the bottom of the box
- Plate 5 is the insert that will go into the bottom of the box
- Plate 6 is a TPU gasket that is completely optional. If you want the box to seal up a little better, you can print that, otherwise you don't need to.
NSG3Dprinting
