Dark Gengar Pokemon Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 100x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.84mm

    #000000 PLA BambuLab Matte Charcoal  Transmission Distance: 0.6
    #00358e PLA BambuLab Basic Blue  Transmission Distance: 4
    #482960 PLA BambuLab Basic Indigo Purple  Transmission Distance: 1.1
    #cd007b PLA BambuLab Basic Magenta  Transmission Distance: 3
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
This print uses 5 unique filaments

Swap Instructions:
    Start with Charcoal
    At layer #8 (0.72mm) swap to Blue
    At layer #10 (0.88mm) swap to Indigo Purple
    At layer #13 (1.12mm) swap to Magenta
    At layer #17 (1.44mm) swap to Jade White for the rest.