November 25, 2025
Description
The Jewelry Display Tower is designed to have a small footprint, while still being able to hold quite a bit of jewelry and keep it organized. It is perfect for the kid's room as well as for a stylish retail display.
Printing Recommendations:
This model has very tight tolerances. I would recommend using a smooth build plate in place of the gold textured PEI plate. This allows for no loose fitment or wobbling at any of the connecting points. All of my prototyping and printing is done on a Bambu Lab X1-C using Bambu Lab filament. The logo seen in the images of this model is privately owned and not part of this print file. This product is intended for personal or retail use. The file included here is intentionally left blank to allow for the addition of your own unique branding if wanted.
Assembly:
The stand prints in pieces and requires no glue or any hardware to assemble. It was designed with easy disassembly in mind for ease of shipping and transport from trade shows. There are screws included in the file for securing the arms to the tower, however, they aren't really necessary since the arms are a good, tight fit. The screws do provide peace of mind though as the tower and arms “wear in.” These only really require finger tightening. I included 2 extra screws in the print profile just in case one gets tightened a little too tight.
Capacity
This tower is designed to hold 12 pair of earrings and several key chains and/or bracelets. Each arm is a little over 3" (79 mm) in length.
Design
The wide base makes this jewelry rack very sturdy without being heavy or taking up a lot of space. It doesn't try to tip over when adding/removing items from it.
License:
Standard Digital File License
Tyler Made
