Apothecary Diaries - Character Art

Boost MeBoosts help me to make more designs like this.  If you enjoy this poster, please consider giving me a comment, like, or boost! :)

“Curiosity is only dangerous when you pretend you don’t have it.”
― Maomao

The Apothecary Diaries has been one of the most addictive series I’ve watched lately. It blends mystery, palace intrigue, and a surprisingly grounded focus, all carried by Maomao’s completely unfiltered and unapologetic personality. The whole setting from the inner palace to the political undercurrents make the story feel rich without ever dragging.  As I couldn't find any prints for this out there, it was only fitting that it be my next project!

 

Hueforges can be resized by adjusting only the X and Y scale—leave the Z height unchanged for best results.

Each print is 132.97x200mm

These prints display wonderfully with a 3d printed HueForge stand, such as the middle size shown here (as shown in the print photos):
https://makerworld.com/en/models/153050-3-collapsable-stand-sizes-hueforge-etc?from=search#profileId-167215

 

Project: Anime - Apothecary Diaries - Title Characters.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 

The Model is 132.97x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.76mm

 

Filaments Used:
    PLA BambuLab Basic Black  Transmission Distance: 0.6
    PLA BambuLab Basic Blue  Transmission Distance: 4
    PLA BambuLab Basic Pumpkin Orange  Transmission Distance: 5.5
    PLA BambuLab Basic Jade White  Transmission Distance: 5

This print uses 4 unique filaments

 

Swap Instructions:
    Start with Bambu Basic Black
    At layer #7 (0.64mm) swap to Blue
    At layer #12 (1.04mm) swap to Pumpkin Orange
    At layer #16 (1.36mm) swap to Jade White for the rest.