Tree of Life Customiazable Office Door Name Plate

This name plate is customizeable and fits the full bed of the A1 Printer. I printed the pictures above in the Matte greene and I printed the name plate with a .2 nozzle. You don't have too, but I recommend it. 

The plate is printed seperate and slides in. To attach it to the wall I used some command strips. I printed it in a Matte finish PLA and it worked GREAT!

I used supports within the name plate holder:

TO REMOVE THE SUPPORTS:
I reccomend a pick of some kind or use a VERY small allen/hex wrench. Remember the back part will be covered by the name plate so you can scratch it a little, but the front will NOT. So be careful not to scratch it.

If you havev questions or want more advice or have any issues please let me know!