Ergonomic Toolset for broom/vacuum (old version)

→→→ Please check out V3 here ←←←

V3 - Better Clamps and better print settings for optimum strength

 

 

 

 

OLD! (v2) → Ergonomic toolset for a broom/ vacuum or any stick/pole [20-60mm]

This toolset is a ergonomic design and extra helpful for those with a disability like myself. Since a motorcycle accident I've lost my left arm. So this toolset comes in handy, but it can be used without a disability.

This is V2

 

clamps : 2 different versions 

 

nuts [M3]  

inserts [M3x3]

 

All standard M3 Nut 

The inserts [M3x3]: { https://www.amazon.nl/dp/B0DCBXJ9JK?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 }

 

 

Select the clamp size you need from the print beds.

 

Print 1 set:

• 1x handle
• 1x ring

• 2 x clamp (Select from print profile for the size you'll need)

   

  + hardware

• 8x bolt (M3x15) 
• 8x insert or standard nut (M3x3)

If you select a clamp you'll see the size in the description under ‘Objects’

 

My living room broom and my vacuum

 

 

 
I've came to a handle with a perfect ergonomic feeling. This handle is a bit taller, thinner and under a ergonomic angle (better than V1)

 

Sizes: 

20	21	22	23	24
25	26	27	28	29
30	32	34	36	38
40	42	44	46	48
50	52	54	56	58
60

 

 If you need a specific size. Please ask and i will upload the requested size.

 

 

 

Boost MeIf you like my work. Please leave a comment, like or feeling generous a boost would be very much appreciated.

 

 

Please leave a comment if your using this design. It means a lot if i can reach more people who would love to use this.