AMSlite底座打印板支架Print Plate Bracke

The model has been updated. The printed version can now be placed in a staggered arrangement for easier removal of the plates.

The second plate in the second printing configuration is the updated version.

A printed plate bracket that fits the drilled holes of the original AMS Lite base has been created, featuring four slots.

Printing Parameters:

• No additional accessories required
• With bridging (flow rate: 1.8, speed: 30 mm/s)
• No supports needed
• PETG is recommended for printing

⚠️ Note: This print includes bridging. If you're unsure about the bridging quality, you can add supports manually.

更新了模型，打印版现在可以错开摆放，方便取板

第二个打印配置里的第二盘就是更新后的。

做了一个与原版amslite底座打孔贴合的打印板支架，四槽位

无配件、有桥接（流量1.8、速度30）、无支撑、推荐使用petg打印

注意：打印有桥接（不放心桥接的，可以自己加上支撑）