Zenitsu Agatsuma - Demon Slayer (Kimetsu no Yaiba)

A nice Hueforge print of Zenitsu from Demon Slayer (Kimetsu no Yaiba) ready to unsheath printed in 4 colors.

I personally printed it with a 0.2mm nozzle on my A1. I would actually recommand using a red filament with higher transmission distance for a darker result that would probably look better, but it's the only one I had.

 

Enjoy !

 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x112.29mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.32mm and the Actual Thickness is 2.32mm

    #000000 PLA BambuLab Matte Charcoal  Transmission Distance: 0.6
    #de4343 PLA BambuLab Matte Scarlet Red  Transmission Distance: 2
    #ffd500 PLA+ Sunlu Pure Yellow  Transmission Distance: 5
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #9 (0.8mm) swap to Red
    At layer #15 (1.28mm) swap to Yellow
    At layer #25 (2.08mm) swap to White for the rest.

 

Boost Me