Japanese ghost bookmark (Hueforge) - No AMS needed

A nice and kinda spooky bookmark inspired from a book cover that I own, in a japanese style.

 

I used silver filament to make the butterfly shine a bit, but grey should work fine too ! Changing it for a wildly different color would change the face's colors, so while it would make the butterflies shine, it may look weird. I'm really curious to see what results you can achieve though !

 

I added a brim because I had adhesion issues on my A1, but it may not be needed on enclosed models. It detaches very easily though.

 

Instructions :

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.4mm and the Actual Thickness is 2.4mm

    #1c254c PLA BambuLab Matte Dark Blue  Transmission Distance: 1
    #0086d6 PLA BambuLab Basic Cyan  Transmission Distance: 3.5
    #a6a9aa PLA BambuLab Basic Silver  Transmission Distance: 0.5
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Dark Blue
    At layer #9 (0.8mm) swap to Blue
    At layer #14 (1.2mm) swap to Silver
    At layer #18 (1.52mm) swap to White for the rest.

Boost MeBoost me if you liked it !