Mini Armoire - Functional Desk Storage

Boost MeIf you like the model, please give it a BOOST :)  

Functional Mini Armoire for a desk, table, or shelf! 

Features two drawers and an upper cabinet section with hinged doors (uses 1.75mm filament as the hinge) and two internal shelves. 

Also could be used in a dollhouse or other miniature decor situation, model is about 1:12 scale for a large wardrobe.

Dimensions at 100%: 205mm H x 144mm W x 67mm D

 

To install the doors, first cut four pieces of 1.75mm (standard size) filament. You'll need two pieces that are about an inch long, and two shorter pieces about ½ inch for the top hinges.

Slide a 1 inch piece of filament into the bottom hole on the door from the back using the guide hole, hold with your finger or glue in place and slide the end of the filament down into the bottom hole on the armoire. Then align the door with the top hole and slide the ½ inch piece through the hole on the top of the armoire down into the hole on the top side of the door. Snip off any filament that still sticks out of the top or if bottom piece is too long you can also snip that to leave about 3/4 inch. Then repeat with the second door.

Hinges hold themselves in place with gravity.