Aether 2.5 / 3

Here's my remix of the Aether 4 frame thanks to the generous files provided by Dr. J. Ma. I tweaked the body a decent amount in blender to suit the O4 camera as well as the battery/FC area changes needed for the rescale. Mounting features were reapplied in OnShape so all of the parts still bolt up correctly.

This is designed to fit a O4 lite and an AIO FC and flown on 2S with 2.5" props. - Another user confirmed that 3" props do fit as well. 3" will likely be a more optimal build for this frame as I scaled the body as small as possible - hence the added difficulty to build.
Build is tricky and involves figuring out favorable board orientations and you'll likely have to solder your motors to the FC with everything threaded through the frame but not bolted down.

There is also a hole for a 14mm camera (analog/walksnail/hdzero), but you will need some small tpu washers to fill the gap between the camera and body. I have not personally mounted one, but I checked clearances with a Caddx ant in cad, so please let me know if it works for you.

Print with 3 walls and 0% infill. Frame should be 24/25g out of PETG-CF

My apologies if you run into any issues with your print, this is my first foray into a project of this complexity. My print worked correctly, but please let me know if you have issues and I will try and address them :)

Build pictured:

FC: JHEMCU G474ELRS AIO 1-2S 12A

Motors: 1104 8600KV YISDO 

Props: GEMFAN Flash 2540 

VTX: DJI O4 “lite”

Battery: Tattu R line 550 2s