Geisha Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 186.67x250mm in size

You may print at higher layer heights below the Base Thickness of 0.4mm
The Max allowed Thickness is 2.16mm and the Actual Thickness is 2.16mm

#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
#646c74 PLA Copymaster 3D Grey Transmission Distance: 1.5
#080a0d PLA BambuLab Basic Black Transmission Distance: 0.3
#c00d1e PLA BambuLab Basic Red Transmission Distance: 4

This print uses 4 unique filaments

Swap Instructions:

Start with Jade White
At layer #7 (0.64mm) swap to Grey
At layer #13 (1.12mm) swap to Black
At layer #17 (1.44mm) swap to Red for the rest.

Boost Me