F1 FERRARI SF25 FRONT WING – 1/8 SCALE + stickers

Ferrari SF25 F1 Front Wing 1/8 Scale model

Boost MeDid you like this highly detailed F1 Front Wing Model?
If you appreciate the design and effort, please consider giving a couple of boost and rate the profile!
PLEASE BOOST this model to help it reach more f1 enthusiasts. Download, print it beautifully, and share your amazing makes! Thank you! 🏎️💨

It includes:
- F1 front wing replica
- Stickers to print (look at documentation)
- Stand to display it

The model and stickers are made to be easily scalable, just look up the README.txt in the documentation, to know at which scale you can print the model, stand, and stickers, it's that easy!

This is a highly detailed scale replica of the Ferrari SF-25 Formula 1 front wing assembly, capturing the aerodynamic profile and livery elements of the car designated for the 2025 racing season.

This is a 3D printable model of the Ferrari SF25 front wing, designed for the 2025 season featuring the iconic liveries of Charles Leclerc and Lewis Hamilton. Created at a precise 1/8 scale, this model comes with a complementary A4 PDF sticker file that you can print and apply for an authentic racing look. 
It also includes a beautiful stand to display the wing at 60°, with a little sticker to upgrade the model experience.
With just the right amount of work, it can turn out amazing, even professional! 🏎️
 

Final Dimensions (Approx.): [254 x 67 x 195] @ 1/8 Scale

Printing

• Layer Height: 0.16 - 0,2 mm is fine
• Infill: 20%
• Horizontal expansion: 0,1 to 0,3 mm. Not needed but recommended, it makes the print more resistant as the flap are thin
• Walls: 2/3
• Support: tree
• Bed Adhesion: brim but not necessarily.  

To reduce printing time you can split the 3D model in two parts,
Its easily scalable thanks to my guide to scales, included in the zip
If you want to print the model in a different scale, use the percentages found in the README file

• 1/6 scale: 133.3%
• 1/8 scale: 100%
• 1/10 scale: 80% ...

Note: The same percentages apply when scaling the A4 PDF sticker file and the display stand.

Post Processing

For a nice result:
- Use sandpaper (patience is needed) to smooth the print out, you can go from 80 grit, 120, 240, 500, and even finer
-Use primer (with filler if necessary), make sure is plastic safe
- Repeat the process a couple of times
- When it's completely dry you can can print it with a couple of layers of spray paint: You first spray the black, dry, mask the black and spray red (I used red RAL 3001)
- Apply a thin protective layer on top like some clear paint
- Apply the decals included in the PDF file

 

IMPORTANT NOTICE ⚠️

• SALE & DISTRIBUTION RESTRICTIONS: You are NOT ALLOWED to sell or distribute any of the files (3D model, PDF sticker file, or any derivatives and 3D-printed versions) without explicit permission.
• PERSONAL USE ONLY: These files are provided strictly for personal use.
• UNAFFILIATED DESIGN: This model is an unofficial, fan-made design and is not affiliated with Ferrari, Formula 1, or any associated sponsors. I assume no responsibility for any misuse or infringement issues.
• This is only for hobby purposes