Street Art Judy Hopps

World of GLT 3d offers you:

 

 

Boost MeHappy printing! Don't hesitate to give it a like or/and un Boost it encourages my work ;-)

 

 

Project: Street Art  Judy Hopps.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 0.96mm
The Max allowed Thickness is 3.76mm and the Actual Thickness is 2.96mm

Filaments Used:
    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.6
    #545454 PLA BambuLab Basic Dark Gray  Transmission Distance: 0.6
    #c00d1e PLA BambuLab Basic Red  Transmission Distance: 4
    #0086d6 PLA BambuLab Basic Cyan  Transmission Distance: 3.5
    #00ae42 PLA BambuLab Basic BambuLab Green  Transmission Distance: 2
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
This print uses 6 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (1.6mm) swap to Dark Gray
    At layer #9 (1.80mm) swap to Red
    At layer #11 (2.20mm) swap to Dark Gray
    At layer #12 (2.40mm) swap to Cyan
    At layer #13 (2.60mm) swap to Jade White for the rest.
 

 

The Hueforge is avec border :-)


Weighed about 102,28g in 4h28.

(Printed on Bambulab H2C)

 

 

3D printing : World of Glt 3d