Mini Desktop Trash Bin - Fast Print (Vase Mode)

Check out my newly released models:

Mini Bag Clip v2

Cable Organizer v2

--------------------------------------------------

After coming across Benjamin's brilliant desktop trash bin and seeing his use of 1mm outer wall vase mode, I wanted to have a go at it myself. I wanted to create a trash bin that looks more like an accessory/container rather than the usual trash bin style. I like the Japandi style quite a bit so went in that direction. Because the model uses 1mm outer wall vase mode, it is much much faster to print than most desktop bins while still being strong enough. The whole assembly prints in about 3.3 hours on P1S.

Boost MeI've shared the Onshape link below and uploaded STEP files so that you can edit the model. If you like my work, give it a boost!

Do you want to sell 3D prints of my designs or support my work? Join my commercial membership on Patreon 🎉

→ Model link on Onshape ←

 

Here are the available sizes (I'll add more based on feedback):

1- Medium: 125 × 125 × 150mm

 

There are two hinge mechanisms available:

1- Centered Hinge: Intuitive to use. Offers a slightly smaller opening and slightly less internal usable volume. Push at the front to open the lid.

2- Hinge at the back: Less intuitive to use. Offers a slightly larger opening and slightly more internal usable volume. Push at the back to open the lid.

 

The bin assembly consists of four parts:

1- Bin Base

2- Inlay: It is used for holding the plastic bags inside the bin base

3- Cap: It provides structural integrity and keeps every together

4- Lid: It is the part that swings open

---------------------------------------------------------

Check out my other models:

Compact Phone Stand

Clothes Hanger Connector Hook

Loud Whistle | 3 Sizes | 100 dB+

Double Wall Hook | Coat Hanger

S Hook

Pistachio Cup

Auto-locking Hanger (Ribbed)

Clamshell Box - 20+ Variants - 33gr Filament