Harry Potter's Wand Flashlight | Lumos Spell

Want a replica of Harry Potter's wand that actually lights up just like the "Lumos" spell?  This wand requires no AMS, is easy to print, and is a flashlight.  This is a replica of the wand used in the first two movies.

Light options

1. LED Light – use the maker's supply LED light linked on this page.
2. No Light – You can also print without the light if you want a replica of Harry Potter's wand, but don't need/want the flashlight.

Bambu filaments used

• Matte Chocolate Brown
• Metal Copper
  • Any reddish brown filament would be close to the wand in the movie.

Assembly is quick

1. Use the peg to connect the wand tip to the base:

2. Then, if you want it to light up, insert the LED light into the top like you see below, and then put the cap on over it.

3. Take the included magnet and drop it into the cylinder as you see below:

4. Slide the cylinder into the wand's bottom piece like this:

5. Lastly, screw the bottom into the wand.  You can unscrew it any time you need it.

Turning the light on/off

Simply unscrew the bottom and touch it to the tip of the wand.  You can also use any other magnet, such as a fridge magnet instead.