Hueforge La Grande Vague de Kanagawa Japon

Hueforge La Grande Vague de Kanagawa Japon

Boost MeBoost me please, it's free :D

Project: La grande vague de Kanagawa complet.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 240x168.53mm in size
You may print at higher layer heights below the Min Depth of 0.64mm
The Max Depth is 2.6mm and the Actual Depth is 1.9mm

Filaments Used:
    PLA BambuLab Matte Charcoal 
    PLA BambuLab Basic White
    PLA BambuLab Basic Red 

 

This print uses 3 unique filaments

Swap Instructions:
    Start with Charcoal
    At layer #8 (0.72mm) swap to White
    At layer #17 (1.44mm) swap to Red for the rest.
 

 

Please leave a comment and like if you like my Hueforge. Thank you very much.

Non-commercial !!!           Non-commercial !!!              Non-commercial !!!           Non-commercial !!!