Christmas KITcard House – Print-in-One

🎄Christmas KITcard House🎄

 

 fully printed in one single sheet. All parts are connected with thin break-off bridges.
Just use small flush cutters to snip out the pieces and assemble the mini house in a few minutes.
No glue. No supports. No complicated steps.

Perfect as a small Christmas decoration or a simple DIY gift.

🎄Assembly🎄 :

1. Cut each part from the card using flush cutters.
2. Clean small nubs if needed.
3. Snap all parts together following the obvious shape/slot layout.
4. Done — enjoy your Christmas mini house! 🎄

Print Settings

• Material: PLA
• Layer Height: 0.2 mm
• Supports: No
• Nozzle: 0.4 mm

                                                                    please use only 0.2 layer height . the model is designed for this height

 

If you enjoy this model, feel free to leave a Like, Boost, or Follow . Thank you! 🎄✨ if there is some problems with snaping pls give me know

Boost Me