5x5 rubiks cube

this is a 5x5x5 Rubik's cube I designed.

 

it is relatively easy to print as you can print it all in the same color and add stickers on afterwards.

 

to assemble, you must screw 5 M3 16mm bolts into the center then place the pieces in around these pieces and screw in the final M3 bolt after all pieces are in place

 

to print:

use supports but try to avoid large overhangs as it needs to be precise shapes

any infill percentage and type works, I used 10% and grid

I printed the center piece on 3 corners with no supports as this gave it the most strength and meant i didn't have to remove supports from inside the holes

 

if you enjoyed please:

Boost Me