Gridfinity Magnet Holder Tubes and Bin for 6u

Remix of @Karolans awesome Gridfinity magnet tubes and bin with shorter bin and tubes to fit inside a 6u drawer.

Tubes are 35mm tall, bin is 32mm. I used the tubes and lids that don't contain the thickness of the batteries. If you want the lids to contain the thickness, you can retrieve different lids from the original design and use them on these tubes as they are compatible.

NOTE: I did not use the color painter, but instead used a filament change command in the slicer at layer 6 for the tubes and layer 152. You should change the color of the tubes to be the “accent” color (in my case, green) and the filament change to your “base” color (in my case, black). Opposite for the bin.