September 25, 2023
Description
This support has been meticulously designed to seamlessly integrate with the "DIY Dehumidifier for 3D Printer Filaments" on an Original Prusa MK3S+ printer. Although I haven't had the opportunity to conduct a test run, I firmly believe that it can be equally compatible with an MK4 model.
Moreover, considering its dimensions, all the printed parts and components can be effortlessly fabricated utilizing an MK3S+ printer, employing either PLA or PETG filaments.
It is worth noting that some supplementary screws will be required for assembly; however, it is a noteworthy advantage that no modifications to the hardware are necessary.
Furthermore, this support boasts several strategically placed additional holes, facilitating its adaptability to other printer models through the utilization of T-nuts.
Currently, I am working on an additional support structure that will enable direct filament placement, when the filament dryer is not needed.
| Description | Reference Image | Qty | |
|---|---|---|---|
| 1 | printer_dryer_mount | 1 | |
| 2 | bracket_center | 1 | |
| 3 | bracket_left | 1 | |
| 4 | bracket_right | 1 | |
| 5 | M4 x 12 x 0,7 flat allen screw | 6 | |
| 6 | DIN 912 M3 x 20 x 0,5 hex screw | 4 | |
| 7 | M4 x 0,7 square nut | 6 | |
| 8 | M3 x 0,5 hex nut | 4 | |
| 9 | M3 x D8,2 x h1,3 mm washer (thick washer) | 4 |
I hope you find this useful.
Happy printing.
https://www.printables.com/model/494417-diy-dehumidifier-for-3d-printer-filaments
If you need to continue printing while drying filment at the same time, you can check this model:
https://www.printables.com/model/587294-filament-spoolholder-for-dryer-support-on-3d-print
License:
BY-SA
10,986
manuelm.arg
