Hype Chain Pendant Hanger with Swivel

Hype Chain Pendant Hanger with Swivel

This is a pendant hanger designed to work with our side and end opening chain links (found here:https://makerworld.com/en/models/1932553-chain-links-for-team-logo-fan-hype-chain#profileId-2074744 )

This allows the starting links to attach to your chain and lets you rotate your logo pendant if it is double sided or helps the logo to stay facing forward and prevent chain twisting.

Use our split link to attach your logo pendant to the lower swivel (found here:https://makerworld.com/en/models/1936239-chain-logo-pendant-connector-with-split-link#profileId-2079020 )

Please note this is a print in place swivel.  After letting the part fully cool, you will need to gently rotate the swivel back and forth to break it free. Once broken free it will take several rotations to break the part in so it can rotate freely.

Do not change layer height from 0.20 as it will affect clearances and a faulty part may result.

If you want a plain heart shaped hanger without a swivel, a print profile for that has also been posted.

Find my collection of chain and chain parts here: https://makerworld.com/collections/17309260

UPDATE 2/27/26:

Added PETG print profile.  I have only tested this using SUNLU Elite PETG using Bambu Studio's SUNLU PETG filament profile. If you are able to successfully print with another brand, let me know in the comments so others will know too. The original design for PLA did not allow enough clearance for PETG and layers would fuse together while printing.  Please use the new PETG profile if you want to try the design with PETG instead of PLA.