Heavy-Duty Dustpan for Broom – Wide Mouth, No Spill, Print-Ready
🧠 Stop chasing dust.
This wide-mouth dustpan is designed to catch everything in one sweep — crumbs, debris, workshop dirt, 3D-print scraps, pet hair.
If you print it and use it,
leave a rating and photo — real feedback helps improve future versions.
Happy printing 👊
🧹 PRODUCT DESCRIPTION
This is not a flimsy dustpan.
This is a solid, workshop-grade dustpan designed for real use, not decoration.
✅ Why this dustpan works better
- Wide angled mouth → debris goes IN, not under or around
- Raised side walls → no spill when lifting
- Flat front edge → perfect contact with floor
- Thick walls & reinforced geometry → no flex, no cracking
- Optimized for 3D printing → strong, clean, fast to print
Perfect for:
- Home cleaning
- Workshop & garage
- 3D printing scraps
- Woodworking dust
- Pet hair & litter
- Outdoor debris (balcony, entryway)
Designed to be used with a broom, not against it.
🖨️ PRINTING SETTINGS (Tested & Realistic)
Recommended material
- PLA+ (indoor)
- PETG (garage / workshop)
- ABS / ASA (high abuse)
Suggested settings
- Layer height: 0.28 – 0.32 mm
- Walls: 3–4
- Infill: 10–15% (gyroid or cubic)
- Supports: NO
- Brim: optional (large base already stable)
👉 Prints strong even at low infill thanks to geometry.
💡 DESIGN DETAILS
- Clean internal slope for easy emptying
- Rounded corners = stronger layers + easier cleaning
- No sharp edges
- Scalable without issues
This model is functional first, not just “nice to look at”.
🧪 You can easily:
YEMI | 3D Lab • Functional • Design
