Adjustable Skadis spacer (no hardware)

Here is an adjustable spacer for IKEA Skådis boards.
It requires no additional hardware to assemble and mounts via a secure press fit.

Thread both pieces together and insert the spacer into the board.
If there’s still a gap between the spacer and the wall, insert a 4 mm Allen key through the hole and turn it to extend or retract the spacer.

If you use your own settings, make sure to apply the variable layer height to the threads so it runs smoothly.

22.01.2026

Added model measurements and 2 new longer screws: 16mm and 18.5mm

Height of the Base (excluding the connector): 14mm

Height of the Screw (Original): 14mm

Height of the new longer screws:  16mm and 18.5mm

I am testing out how good a plug would work to hide the hole of the spacer, stay tuned.