Boost MeBoosting me will keep me going, thank you for your support! :)
Upgrade your lighting setup with this modular 45-degree mounting system. Designed to hold standard LED strips, this profile directs light at a 45-degree angle, making it perfect for under-cabinet lighting, desk backlighting, or display shelves.
The angled design helps eliminate harsh glare by directing light outward rather than straight down, creating a smoother, more professional ambient glow.
Key Features:
📐 Perfect 45° Angle: Projects light into the room or onto a wall for optimal diffusion and visibility.
🧩 Modular System: Includes 200mm straight sections and compact 30x30mm 90-degree corner pieces, allowing you to create a seamless continuous run of light around bends.
📏 Precision Fit: Designed with an 11mm wide mounting surface, providing the perfect fit for standard 10mm wide LED strips with just enough clearance for easy installation.
- 💡 Glare Reduction: Hides the raw LED strip from direct line-of-sight when mounted under shelves or desks.
Dimensions & Compatibility:
- Straight Segment Length: 200mm (Fits on standard build plates like Ender 3, Bambu Lab A1/X1/P1, Prusa MK3/4).
- Corner Segment Dimensions: 30mm x 30mm.
- Internal Channel Width: 11mm.
- Max LED Strip Width: 10mm (Standard 5050 or 3528 strips).
Printing Recommendations:
- Material: PLA is suitable for most standard LED strips. If you are using high-density/high-wattage LEDs that get hot, PETG is recommended to prevent warping.
- Color:
- White: Recommended for maximum light reflection.
- Black: Recommended if you want the mount to "disappear" into the shadows.
- Infill: 15% (Structural strength isn't critical here).
- Orientation: Print the straight pieces standing on their end (vertical) or flat on their back face depending on your bed adhesion. Corner pieces should be printed flat.
Installation Instructions:
- Clean your mounting surface (desk, wall, shelf).
- Attach the printed mounts to your surface using Double-Sided Tape (VHB) or a dab of hot glue/super glue.
- Line up the 90° corner pieces where needed.
- Peel the backing off your LED strip and press it firmly into the 11mm channel.
Clickytop
