P2S QR Code Clips for 3rd party Build Plates

These are clip on QR codes for 3rd party build plates, such as the Biqu ones - designed for the P2S.

The QR codes that come with these plates do not work on the P2S, causing a “build plate not recognized” message.

To avoid having to keep clicking on “ignore and continue” or disable plate recognition, you can print these clips, and attach them to your build Plate.

Clips are provided for all four build plate type - Textured, Smooth/High Temp, Cool and Engineering. Just print the ones you want to use. It takes about 30 minutes to print all four.

You also need the clip, which takes about 20 minutes to print.

The QR codes press fit into the clip, it's intentionally a tight fit.

Align the clip on as shown in the photos, to ensure the calibration line print does not hit the clip.

I recommend using black and white PETG. PLA will likely melt due to the build plate temperature.

 

New: Added two new clip sizes, Large and Largest for build plates with a larger front lip.

New: Clip is now customizable in the customizer - make a clip for your specific plate!

New: 28/1/2026 New improved clips and QR codes. QR codes now fit better onto the clips, and clips are slightly thicker - improved QR code retention

 

Check out my Biqu Glacier Plate QR code clips for P2S here: https://makerworld.com/en/models/2107872-p2s-qr-code-for-biqu-glacier-plate

Boost MeIf you like these clips