Wall Hook | Coat Hanger | Towel Rack

Check out my newly released models:

Shower Wall Hook

Toothpaste Squeezer

----------------------------------------------—

My auto-locking hanger with its ribbed design has been well-received. I wanted to make a version without the mechanism, while keeping the design. This is a multi-purpose wall hook. It can be used as a towel or coat hanger. It can be used to hook bags and other heavy items as well.

Boost MeIf you like my work, give it a boost!

Do you want to sell 3D prints of my designs or support my work? Join my commercial membership on Patreon 🎉

Dimensions: 21.6 x 27.6 x 64.8mm (X, Y, Z).

 

There are 2 versions:
1- Double-sided Tape Mount: If you are using it for towels, or relatively light clothing this is a good choice. It's simpler to print and mount. There is a 16mm wide textured surface on the back. Thick & transparent double-sided tape adheres to that surface quite strongly. I would highly recommend thick transparent double-sided tape, thin or foam tapes won't be strong enough. Here is an option: Link to the double-sided tape.

2- Screw Mount: If you will be using it to hang bags or other relatively heavy objects, this is a better choice. It can carry quite a bit. The screw mount fits quite tightly into the hook. The entry diameter for the screw is 8.5mm. The exit diameter is 4.4mm. I would recommend inserting the mount into the hook a couple of times before mounting so that the edges are smoothed out. There is a small opening in the middle to help you separate the mount from the hook. You can use a pen or a tool to push the mount out.

----------------------------------------------------

Check out my other models:

Mini Bag Clip v2

Cable Organizer v2

Belt Hanger | Belt Hook

Clothes Hanger Connector Hook

S Hook

Mini Desktop Trash Bin - Fast Print (Vase Mode)

Pistachio Cup

Auto-locking Hanger (Ribbed)

Clamshell Box - 20+ Variants - 33gr Filament