Protective cover for T238 Electric Speed Loader PRO.
Key Features
- Joystick Protection: Prevents accidental snaps or pressure on the fragile control stick while in your gear bag.
- Dust Guard: Keeps the loading nozzle clean of dust and dirt.
- Adapter Friendly: Designed with enough clearance so you can leave your adapter attached while the cover is on.
- Bonus Storage: Specifically modeled to hold the Unload Adapter by Drug2 (the yellow part pictured) securely inside.
Securing the Cover
The cover is designed with a slight friction fit, depending on your printer's calibration. You can use one of these three methods to ensure the lid stays on:
- Quick Fix: Add a piece of electrical tape at the the top rim of the speed loader to increase friction. It should be enough to only tape one side.
- Tensioner: Use a piece of shock cord or flat elastic through the integrated side handles for a secure, pull-down fit.
- Magnetic: Glue 10x3 mm neodymium magnets into the round posts of the cover and corresponding spots under the top of the loader for a satisfying "snap" closure.
marcinx
