February 29, 2024
Description
1st things 1st:
Leave a like if you download AND tips to improve the design are highly welcome.
As i could not find a proper Stand for the EE-3 Blaster, i decided to give my little knowledge about 3D modeling a chance and put together this little Blaster stand in Blender.
This Stand is about 13 cmยดs (or 5,11 inch) tall, so the stock part will be lifted high enough to not touch your shelf, desk or wherever it might stand - IF the Blaster is balanced well enough... mine is not... too much weight on the stock.
Base will fit to print on an Ender 3 V2
I also wanted to have the Stand as short as possible so i decided to have only 1 Holder in the Middle of the Blaster. It will sit directly under the Fire Chamber, fitting RKORMOS Blaster (https://www.thingiverse.com/thing:1025804), or April Storms Original
http://www.thingiverse.com/thing:150686.
Additional thanks to Farshadnia and ty10y for creating the Mandalorian Symbols i used.
Printing Tips:
Print the Holder upside down.
I used Cura and put 2 Blockers on the thinner Parts with 100% infill.
Or you just go and print the whole thing with 100 % infill, just to make sure its solid enough to take the weight of the blaster.
Use 2 screws to connect Base and Holder (obviously...)
Happy printing
License:
BY-NC
3d Props
