📌 Apple iPad 2 (A1396) Secure Wall Mount
This is a 3D-printable wall mount designed specifically for the Apple iPad 2 Wi-Fi + 3G (Model A1396), released in March 2011.
The mount provides a secure, clean, and space-saving solution for mounting your iPad on a wall while maintaining easy access to buttons, charging port, and ventilation.
✅ Compatible Device
- Apple iPad 2
- Model: A1396
- Thickness: 8.8 mm
- Weight: ~607 g
⚠️ This model is designed for bare iPad only.
If you use a case or skin, additional clearance may be required.
🧩 Key Features
- Designed specifically for iPad 2 (A1396)
- Secure fit with safe printing tolerances
- Open design for airflow and heat dissipation
- Charging cable access from the side
- Clean, minimal wall-mounted appearance
- No permanent modification to the iPad
🖨️ Printing Recommendations
- Printers: Bambu Lab A1 / P1 / X1 series (or similar FDM printers)
- Materials:
- PLA+ (indoor use)
- PETG (recommended for warmer environments)
- Nozzle: 0.4 mm
- Layer Height: 0.2 mm
- Infill: 25% (Gyroid or Cubic)
- Walls: 4 perimeters
🔧 Print Orientation & Supports
- No supports required for most setups
- Enable a brim if your printer has adhesion issues
🛠️ Assembly Overview
- Test fit the iPad before wall installation
- Secure the mount to the wall using suitable screws and wall anchors
- Insert the iPad and connect the charging cable
🧱 Mounting Hardware (Not Included)
Recommended:
- 4× M4 x 20mm Drywall Screw Phillips Flat Head
- Wall plugs suitable for drywall, concrete, or masonry
⚠️ Due to the iPad’s weight (~607 g), ensure the mount is fixed securely into wall anchors or studs.
⚠️ Safety & Disclaimer
- Always test fit before final installation
- Ensure screws and anchors are properly tightened
- The creator is not responsible for damage caused by improper installation or use
📄 License
This model is licensed for personal, non-commercial use only.
Commercial use or resale is not permitted without permission.
Ajmer
