Panther KF51 German 4th-Gen Main Battle Tank 1/35

This month, I had final exams and moved, so I was extremely busy and only managed to complete this one project.

I designed a movable main gun, a stowable missile launch box, and a freely rotating machine gun on the turret. These moving parts took a lot of time. In fact, I spent about 3 times longer on the turret than on the entire hull.

If you like my work, consider leaving a boost — it really helps me keep creating more exciting models!

================================

📋 Recommended Print Settings (For Best Results) 

• Filament: PLA. Different materials have different shrink rates, so using other filaments might cause fitting issues or dimensional errors during assembly. 
• Slicer: Bambu Studio. I recommend using my default profile — I’ve tuned it specifically for this model. 
• Ambient Temperature: If you’re using an open-frame printer like the A1 or A1 Mini, keep your room above 20°C (68°F) to prevent warping. 
• Print Bed Preparation: Wash with soap and water, then dry thoroughly to ensure good adhesion. For small parts, apply a glue stick for better bed adhesion. 

🔧 Assembly Diagram Notes 

• Blue Lines: Require super glue for assembly. I use Gorilla Super Glue. 
• Yellow Lines: These are moving parts. Do not apply glue here.

I designed a foldable support bracket beneath the missile launch canister to secure it in the deployed position.