The Grinch: Holiday Heist Edition | NO AMS

Bring some mischievous holiday spirit to your Christmas setup with this mean Grinch, dressed in a Santa suit and holding a classic candy cane. This detailed 3D model is separated by color, making it perfect for clean multi-color prints and eye-catching results right off the printer.

Designed with easy printing in mind, this figurine works great as a shelf display, desk decoration, or part of a larger holiday scene. Whether you’re printing for Printmass, decorating your home, or just love iconic Christmas villains, this model is guaranteed to stand out.

Perfect for Christmas décor, festive displays, and anyone who enjoys a little green mischief during the holidays.

✨ Features

• Santa suit + candy cane holiday design
• Fully color-separated for multi-color printing
• Works great with AMS / multi-material systems
• Scales easily for small or large displays
• No AMS needed

🖨️ Printing Tips

• Glue is necessary for non AMS version
• Recommended material: PLA
• Print colors separately 

• Supports required

  Important

The Connections between pieces are fitted for (.2mm) Tolerance, different printers will print the pieces loose and some will end up tight. 

Any feed back on the connections or how to make them better would be appreciated.

 Too loose = Use glue 

 Too Tight = scale up or sand down the connections

   Assembly: 

• Remove all the supports (carefully)
• Use picture provided to Locate where every piece goes
• Place or glue in each piece 
• If a piece doesn't fit or look right try rotating it 

• To balance the print do the feet last and rotate them both in and out until it balances