Force Flow Footholds

Here they are like you all asked! the next best Foothold on the web! These footholds are more aggressive than others without sacrificing ejection. They are entirely 3D printed too! I've had over a 1,000 miles on these and finalized on the 18th version! If you need me to print them for you contact me on Facebook at Mason Fage, otherwise, Enjoy! here are critical settings to change on your printer

Strength-

   Wall Loops 10

   Top Surface Pattern (Concentric)

   Top Shell Layers 10

   Bottom Shell Layers 10

   Top/Bottom Solid Infill/Wall Overlap 95%

   Sparse Infill 95%

Special Mode-

   Fuzzy Skin (All Walls)

   Fuzzy Skin Point Distance (1mm)

   Fuzzy Skin Thickness (0.4mm)

Print file at 28 degrees on Y Axis.

Print the hook with at least 95A Overture TPU with these settings. Use HS Overture for a stiffer hook or 98A TPU.

Print the Base with PETG with these settings.

Use #6 ½ and ¾ wood screws to combine the two together.