ZELDA hue forge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 112.5x200mm in size
You may print at higher layer heights below the Base Thickness of 0.24mm
The Max allowed Thickness is 2mm and the Actual Thickness is 1.51979mm

Filaments Used:
    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.6
    #c00d1e PLA BambuLab Basic Red  Transmission Distance: 4
    #ff9016 PLA BambuLab Basic Pumpkin Orange  Transmission Distance: 5.5
    #fec600 PLA BambuLab Basic Sunflower Yellow  Transmission Distance: 4.4
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #4 (0.4mm) swap to Red
    At layer #5 (0.48mm) swap to Pumpkin Orange
    At layer #15 (1.28mm) swap to Sunflower Yellow for the rest.