Minimalist Shower Caddy 23 cm | Adhesive or Screws

A clean, modern shower basket that keeps shampoo, soap & shower essentials neatly in place — with drainage slots so water runs off and everything dries faster.

Now including two sizes and multiple mounting options (adhesive + screws).

 

⸻

 

Sizes & variants

 

23 cm (Full size)

 

Two mounting variants included

• Adhesive / no-drill: basket without holes, large flat mounting surface on the back

• Screw-mounted: back plate with Ø 4.5 mm mounting holes (fits common wall screws)

 

17 cm (A1 Mini compatible)

 

Now available in two variants

• Adhesive / no-drill (scaled to 17 cm width)

• Screw-mounted with Ø 4.5 mm holes (NEW)

 

⸻

 

Included print profiles (now 6 total)

 

1) 23 cm – Adhesive

• Strong: 6 walls, 25% Gyroid, Tree supports

• Fast: 3 walls, 25% Gyroid, Tree supports

 

2) 23 cm – Screw-mounted (Ø 4.5 mm holes)

• Strong: 6 walls, 25% Gyroid, Tree supports

• Fast: 3 walls, 25% Gyroid, Tree supports

 

3) 17 cm – A1 Mini

• Adhesive: 3 walls, 25% Gyroid, Tree supports

• Screw-mounted (NEW): 3 walls, 25% Gyroid, Tree supports

 

⸻

 

Print recommendations

• Material: Prints great in PLA or PETG

• PLA works very well for most bathrooms and is perfectly fine for everyday shower items (especially with the included profiles).

• If your shower gets very warm or you want extra long-term toughness, PETG is the ideal upgrade.

• Supports: Required → Tree supports recommended (profiles included)

 

⸻

 

Mounting notes

 

Adhesive / no-drill

• Clean and dry the surface thoroughly (tile / glass / etc.)

• Use mounting tape / adhesive suitable for your surface and expected load

 

Screw-mounted

• Use appropriate wall plugs/screws for your wall type

• Tighten evenly so the basket sits flat and secure

 

⸻

 

If you enjoy the model, I’d really appreciate a Like / Boost — and don’t forget to share a Make 🖤

 

Boost MeIf you print it: a like/boost + a photo of your make helps a lot — thank you! :)