Charizard HueForge Wall Art – 150mm x 136mm

High-detail Charizard HueForge wall art, designed for strong depth, contrast, and clean layer transitions—no painting required.

Printed flat, this model delivers a bold, high-impact result at a compact size. Optimised specifically for HueForge colour layering to make the flame, wings, and motion pop.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150x136.38mm in size
You may print at higher layer heights below the Base Thickness of 0.8mm
The Max allowed Thickness is 2.56mm and the Actual Thickness is 2.56mm

Filaments Used:
    #000000 PLA+ Sunlu Black  Transmission Distance: 0.6
    #ffffff PLA+ Sunlu White  Transmission Distance: 8.5
    #ff8000 PLA+ Sunlu Orange  Transmission Distance: 5
    #f0be02 PLA PolyTerra Savannah Yellow  Transmission Distance: 3.5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #13 (1.12mm) swap to White
    At layer #23 (1.92mm) swap to Orange
    At layer #28 (2.32mm) swap to Savannah Yellow for the rest.

Remember if you want to resize then make sure you only change the X and Y (make sure the Z stays at 3.2mm as changing this will affect how the print turns out)