Jurassic Park Light Box

the classic Jurassic Park sign

My settings for printing are the 0.2mm standard on Bambu slicer with a couple of tweaks:

1. Fuzzyskin - Contour 0.4mm distance and 0.1mm thickness
2. No Brim
3. Wall Generator - Arachne
4. increase the flow ratio slightly - go from 0.98 up to 1.05

Use a Textured PEI Plate and you should be all good

The back plate is a tight fit - it can hold the light up on the wall without gluing

For lighting on all of my light boxes I am using a USB powered LED light from Amazon with a bluetooth controller allowing me to control from my phone