Samus

this is metroid (samus aran) from multiple video games.

 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x160mm in size
You may print at higher layer heights below the Base Thickness of 0.4mm
The Max allowed Thickness is 2.16mm and the Actual Thickness is 2.08mm

Filaments Used:
    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #c00d1e PLA BambuLab Basic Red  Transmission Distance: 4
    #ff9016 PLA BambuLab Basic Pumpkin Orange  Transmission Distance: 5.5
    #e2dedb PLA PolyLite White  Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Red
    At layer #16 (1.36mm) swap to Pumpkin Orange
    At layer #23 (1.92mm) swap to White for the rest.
 

Those are just the filaments i had on hand. use whatever you want.

To scale it, change the x and y dimensions, do not change the z dimension.

Boost Meboost me if you like my prints