Noperabo Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 186.67x250mm in size

You may print at higher layer heights below the Base Thickness of 0.4mm
The Max allowed Thickness is 2.16mm and the Actual Thickness is 2.16mm

    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
    #646c74 PLA Copymaster 3D Grey  Transmission Distance: 1.5
    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.6
    #c00d1e PLA BambuLab Basic Red  Transmission Distance: 4
This print uses 4 unique filaments

Swap Instructions:
    Start with Jade White
    At layer #5 (0.64mm) swap to Grey
    At layer #11 (1.12mm) swap to Black
    At layer #14 (1.36mm) swap to Red
    At layer #18 (1.68mm) swap to Jade White

Border Only Colors from here until the end.
    At layer #25 (2.24mm) swap to Red for the rest.

You can swap the second white at 1.68mm with yellow(preffered), orange or gold. Since that level is for the smokes/flowers it blends in nicely