F1 Tire Pen Holder Collection (2-4 Stacks)

Bring the excitement of the paddock to your desk!

This is a realistic F1 Tire Pen Holder collection.

Whether you prefer Slicks, Intermediates, or Wets, I've designed them all in various heights to suit your needs.

 

Boost MeI put a lot of effort into designing these for every team. If you like this model and enjoy printing it, please give it a Boost! It helps a lot.

 

📏 Dimensions

• Outer Diameter: 75mm
• Opening Diameter (Top): 55mm
• Internal Diameter (Storage): 65mm

📂 What's Included I have uploaded models for all tire types and heights. Each plate contains one specific variation:

• Tire Types: Slick, Intermediate, Wet
• Heights: 2-Tier, 3-Tier, 4-Tier versions for each tire type.

🎨 How to Print & Color (AMS Required) This model is designed for multi-color printers (like Bambu Lab AMS).

1. Select your model: Browse the plates to find the tire type and height you want (e.g., Slick 3-Tier).
2. Copy & Paste: Copy your chosen model and paste it onto the final empty plates (or a new plate).
3. Paint it: Use the "Painting Tool" in Bambu Studio/Orca Slicer to color the sidewall lettering and stripes according to your favorite compound (Red/Soft, Yellow/Medium, White/Hard, Green/Inter, Blue/Wet).
4. Print: Slice and print!

⚠️ Important Technical Note: The "Modifier" Cylinder When you open the 3mf file, you will notice a cylindrical Modifier placed inside the pen holder. Please do not remove or disable this.

• What it does: This modifier is set to disable "Ironing" specifically on the bottom floor of the pen holder.
• Why is it there? If ironing is applied to the bottom floor, the layer time for that specific height increases significantly. This extended time causes the outer wall filament to cool and shrink differently compared to the other layers.
• The Result: Without this modifier, you might see a glossy artifact (band) on the outside of the tire at the floor level due to the shrinkage difference. The modifier ensures a consistent matte finish on the exterior.

🖨️ Compatibility

• Compatible with any printer equipped with an AMS